Lawsonline™  Directory  Expert Witness  OSHA

Aurora Safety & Crisis Planning Michael J. Fagel, PHD, CEM, CPO, CPOI
North Aurora, Illinois
65 S. Randall Rd, Box 882, 60542


Contact:  Michael J. Fagel, PHD, CEM, CPO, CPOI
www.aurorasafety.com
630-234-6612 Or Toll Free
mjfagel@aol.com
Michael J. Fagel, PHD, CEM, CPO, CPOI
65 S. Randall Rd, Box 882
North Aurora, Illinois 60542

Contact:  Michael J. Fagel, PHD, CEM, CPO, CPOI
www.aurorasafety.com
630-234-6612
mjfagel@aol.com
SELECTED BOOKS;
Soft Targets & Crisis Management
What Emergency Planners & Security Professionals Need to Know ~~
AND
Crisis Management & Emergency Planning
Preparing for Today’s Challenges ~~

* Author & Editor
* Public Speaker
* 45 Years of Experience
* Emergency Management
* Experienced University Professor
* Facilitator ~ Consultant
* On-Site Responder
* Oklahoma City Bombing
* World Trade Center Attacks
Information:  
Crisis and Emergency Planning for Businesses,  Disaster Recovery Planning,  Emergency Management,  Emergency Medical Services,  Hazardous Materials,  Homeland Security,  Job Safety Analysis,  Occupational Injury,  OSHA,  Risk Assessment,  Risk Management,  Safety,  Safety Audit,  Safety Engineering,  Safety Occupational,  Security,  Trucking,  Workers' Compensation,  Workplace Injury,  Workplace Violence Prevention, 


SELECTED BOOKS;
Soft Targets & Crisis Management
What Emergency Planners & Security Professionals Need to Know ~~
AND
Crisis Management & Emergency Planning
Preparing for Today’s Challenges ~~

* Author & Editor
* Public Speaker
* 45 Years of Experience
* Emergency Management
* Experienced University Professor
* Facilitator ~ Consultant
* On-Site Responder
* Oklahoma City Bombing
* World Trade Center Attacks

PEG, Inc. Experts Professional Engineering Group
Birmingham, Alabama
950 22nd Street North, Suite 632, 35203


Contact:  Lamar T. Hawkins, J.D., P.E.
peginc.biz
205-458-8516 Or Toll Free
lthpc@aol.com
Experts Professional Engineering Group
950 22nd Street North, Suite 632
Birmingham, Alabama 35203

Contact:  Lamar T. Hawkins, J.D., P.E.
peginc.biz
205-458-8516
lthpc@aol.com
"Free telephone conference call about your case." ---------- Serving the Southeast Region.
Information:  
Accident Reconstruction,  Building Code Compliance,  Building Vibration Analysis,  Civil Construction and Engineering,  Civil Engineering,  Code Compliance,  Concrete and Masonry,  Construction Accidents,  Construction Defects,  Construction Safety,  Cooling Towers,  Electrical Engineering,  Engineering,  Fall Protection,  Forensic Engineering,  Manufacturing Accidents,  Mechanical Engineering,  Metallurgy,  Motor Vehicles,  OSHA,  Paint and Coatings,  Premises Liability,  Safety,  Safety Engineering,  Slip, Trip, and Fall,  Structural Engineering,  Trucking, 


"Free telephone conference call about your case." ---------- Serving the Southeast Region.

DNA Industrial Hygiene
Redondo Beach, California
2520 Artesia Blvd, 90278


Contact:  Dan Napier, CIH
www.cihcsp.com/
310-644-1924 Or Toll Free 800-644-1924
dan@cihcsp.com
2520 Artesia Blvd
Redondo Beach, California 90278

Contact:  Dan Napier, CIH
www.cihcsp.com/
310-644-1924 Or Toll Free 800-644-1924
dan@cihcsp.com
Dan Napier has over 40 years experience in the Industrial Hygiene, Health & Safety field. He has an extensive practice involving Plant Safety, Construction Site Safety & Health oversight. He actively teaches, and practices Industrial Hygiene and Occupational Safety.
Information:  
Industrial Hygiene,  OSHA,  Safety, 


Dan Napier has over 40 years experience in the Industrial Hygiene, Health & Safety field. He has an extensive practice involving Plant Safety, Construction Site Safety & Health oversight. He actively teaches, and practices Industrial Hygiene and Occupational Safety.

Dr. C.J. Abraham - Scientific Advisory Services, Ltd.
Great Neck, New York
3 Baker Hill Road, 11023


Contact:  Dr. C. J. Abraham, P.E.
www.scientificadvisory.com/cv.html
516-974-7565 Or Toll Free
cjabraham1@gmail.com
3 Baker Hill Road
Great Neck, New York 11023

Contact:  Dr. C. J. Abraham, P.E.
www.scientificadvisory.com/cv.html
516-974-7565
cjabraham1@gmail.com

Dr. C. J. Abraham's CV

 

~Over 40 Years of International Experience Consulting to Insurance Companies, Municipalities, Government Agencies, and the Legal Profession in Personal Injury & Product Liability Cases. In Addition, Consultation and Participation in More than 5,000 Matters involving Human Factors, Safety, Personal Injury & Product Liability for Plaintiffs, Defendants, Private Industry, Insurance Companies, Municipalities, and Government Agencies.~ Office phone number: 516-482-5374
Information:  
Accident Reconstruction,  ADA,  Amusement Parks,  Apparel,  Biomedical Injury Analysis,  Brain Damage Injury,  Brain Injuries,  Burn Injury,  Chemical Engineering,  Chemistry,  Concussions,  Construction Safety,  Consumer Products,  Exercise Facilities,  Fire and Explosions,  Fires and Explosion,  Flammable Fabrics,  Foam Pits,  Hazardous Materials,  Helmets,  Household Industrial Products,  Human Factors,  Industrial Accidents,  Industrial Hygiene,  Labels and Warnings,  OSHA,  Park and Playground Accidents,  Personal Injury,  Product Liability,  Recreation Accidents,  Risk Assessment,  Safety,  Safety Engineering,  Safety Occupational,  Slip, Trip, and Fall,  Sports Accidents,  Sports and Recreation,  Swimming Pools,  Textile and Clothing Industry,  Toxic Exposures,  Toy Safety Design,  Trampoline Parks,  Water Parks, 


Dr. C. J. Abraham's CV

 

~Over 40 Years of International Experience Consulting to Insurance Companies, Municipalities, Government Agencies, and the Legal Profession in Personal Injury & Product Liability Cases. In Addition, Consultation and Participation in More than 5,000 Matters involving Human Factors, Safety, Personal Injury & Product Liability for Plaintiffs, Defendants, Private Industry, Insurance Companies, Municipalities, and Government Agencies.~ Office phone number: 516-482-5374

E4 Consulting, Inc.
Jacksonville, Florida
4600 Touchton Road
Building 100, Suite 150, 32246


Contact:  Dr. Paul Eason
www.e4consulting.com
904-279-9300 Or Toll Free 888-504-5454
paul.eason@e4consulting.com
4600 Touchton Road
Building 100, Suite 150
Jacksonville, Florida 32246

Contact:  Dr. Paul Eason
www.e4consulting.com
904-279-9300 Or Toll Free 888-504-5454
paul.eason@e4consulting.com
Dr. Paul Eason at E4 Consulting provides engineering solutions for industry and the legal community. Our Expertise comes from years of combined training and experience in academia, industry and consulting. We assist clients in issues of property loss, litigation, project risk assessment and process safety. Our approach to investigation, analysis, and research follows all applicable codes and standards, to provide the most reliable and reproducible results and opinions. We are available immediately serve clients throughout the nation and abroad.
Information:  
Failure Analysis,  Fire and Explosions,  Fire Forensics,  Fire Origin and Cause,  Industrial Accidents,  Metallurgy,  OSHA,  Product Liability, 


Dr. Paul Eason at E4 Consulting provides engineering solutions for industry and the legal community. Our Expertise comes from years of combined training and experience in academia, industry and consulting. We assist clients in issues of property loss, litigation, project risk assessment and process safety. Our approach to investigation, analysis, and research follows all applicable codes and standards, to provide the most reliable and reproducible results and opinions. We are available immediately serve clients throughout the nation and abroad.

Forensic Analysis & Engineering Corporation
Hampton, Virginia
2503 58th Street Suite A, 23661


Contact:  Meagan McBride
www.forensic-analysis.com
757-265-9333 Or Toll Free 800-224-3595
corporate@4n6engr.com
2503 58th Street Suite A
Hampton, Virginia 23661

Contact:  Meagan McBride
www.forensic-analysis.com
757-265-9333 Or Toll Free 800-224-3595
corporate@4n6engr.com
Forensic Analysis & Engineering Corporation (FAEC) is more than an engineering firm. Our team of professional engineers, qualified scientists and specialized experts will work with you to resolve your case quickly, accurately and objectively. We have been providing a broad range of forensic investigations for a diverse worldwide client base for more than 50 years, by solving thousands of puzzling questions and helping settle billions of dollars in claims and personal losses spanning the gamut from fire & explosions, accident reconstructions, storm & catastrophic events, product defects to a wide array of marine losses. FAEC has a well-founded reputation for providing defendable, court-approved analyses which convincingly define why an event occurred. Our rapid response team is ready 24/7 to support your file effort by getting the answers you need, when you need them!
Information:  
Accident Injury,  Accident Reconstruction,  Admiralty,  Amusement Parks,  Automobile Accidents,  Aviation,  Biomechanics,  Biomedical and Biomechanical Injury Analysis,  Biomedical Engineering,  Boating,  Building Code Compliance,  Carbon Monoxide,  Civil Construction and Engineering,  Code Compliance,  Commercial Vehicle Accident Reconstruction,  Computer Data Recovery,  Computer Forensics,  Construction Claims,  Construction Defects,  Construction Safety,  Consumer Products,  Document Alterations,  Document Analysis,  Document Examiner,  Document Management,  Earthquake Damage,  Electrical Engineering,  Elevators and Escalators,  Equipment and Machinery,  Failure Analysis,  Farms and Farm Safety,  Fire and Explosions,  Fire Forensics,  Fire Origin and Cause,  Fire Protection Investigations,  Food Safety,  Forensic Engineering,  Forklifts,  Geotechnical Engineering,  Groundwater Resources and Contamination,  Hail Damages,  Handwriting Experts,  Human Factors,  Hurricane Damage,  HVAC Investigations,  Indoor Air Quality,  Industrial Accidents,  Job Safety Analysis,  Lab Testing and Analysis,  Ladders and Manlifts,  Litigation Support,  Machine Safety,  Manufacturing Accidents,  Maritime,  Materials Science,  Mechanical Engineering,  Metallurgy,  Mold and Moisture,  Motor Vehicles,  Motorcycle Accident Reconstruction,  Noise Measurement and Control,  Occupational Injury,  Office Buildings,  Oil and Gas,  OSHA,  Paint and Coatings,  Park and Playground Accidents,  Patents,  Personal Injury,  Pipeline Pressure Vessels Failure,  Plumbing,  Process Safety Chemicals and Oil Refining,  Product Failure,  Product Failure Determination,  Product Liability,  Reconstruction,  Reinforced Concrete and Masonry,  Roofing and Waterproofing,  Safety Engineering,  Shooting Incident Reconstruction,  Slip, Trip, and Fall,  Solar Energy,  Structural Engineering,  Structural Failure,  Toxic Exposures,  Trial Consultants,  Water and Flood Damage, 


Forensic Analysis & Engineering Corporation (FAEC) is more than an engineering firm. Our team of professional engineers, qualified scientists and specialized experts will work with you to resolve your case quickly, accurately and objectively. We have been providing a broad range of forensic investigations for a diverse worldwide client base for more than 50 years, by solving thousands of puzzling questions and helping settle billions of dollars in claims and personal losses spanning the gamut from fire & explosions, accident reconstructions, storm & catastrophic events, product defects to a wide array of marine losses. FAEC has a well-founded reputation for providing defendable, court-approved analyses which convincingly define why an event occurred. Our rapid response team is ready 24/7 to support your file effort by getting the answers you need, when you need them!

Forensic Engineering Institute
Delray Beach, Florida
15296 Lake Wallflower Road, 33484


Contact:  Carl Berkowitz Ph.D., PE, AICP
forensicengineeringinstitute.com
631-878-7419 Or Toll Free
cmberkowitz@hotmail.com
15296 Lake Wallflower Road
Delray Beach, Florida 33484

Contact:  Carl Berkowitz Ph.D., PE, AICP
forensicengineeringinstitute.com
631-878-7419
cmberkowitz@hotmail.com
Dr. Carl Berkowitz has held various managerial and administrative positions in the transportation industry, government, private and academic sectors. Dr. Berkowitz has extensive multi-modal experience in planning, design, engineering, safety, security, construction, maintenance, operations and management.

Dr. Berkowitz has written and edited numerous reports, studies, articles and columns for major publications, journals, newspapers and scholarly periodicals. He is a Professional Engineer in New York and New Jersey, and a member of the American Institute of Certified Planners; American Planning Association; American Society of Civil Engineers (Fellow, Transportation Education and Safety Committees); Association of Pedestrian and Bicycle Professionals; Institute of Transportation Engineers; American Society of Safety Engineers; National Association of Railroad Safety Consultants and Investigators; American Society of Transportation and Logistics; American Railway Engineering and Maintenance of Way Association (Committees 11 and 12, Facilities and Structures Subcommittee); American National Standards Institute, ASTM, International, Member Technical Committee F13 and Task Group D11.20.01 (Recycled Rubber); American Public Transit Association, Technical Committees (Public Safety, Rail Safety and Security, Rail Safety, Bus Safety and Rail Standards Policy and Planning); Human Factors and Ergonomics Society, Surface Transportation Technical Group; and Charter Institute of Logistics and Transport (Great Britain), Charter Member; American Physical Society; American Society of Mechanical Engineering, Bioengineering and Applied Mechanics Divisions; American Traffic Safety Service Association; Biomechanical Engineering Society; International Society of Biomechanics; Institute of Electrical and Electronics Engineers and the Vehicle Technology Society; National Fire Protection Association; and Rubber Pavement Association.
Information:  
Accident Investigations,  Bicycle Reconstructions,  Biomechanics,  Elevators and Escalators,  Golf Cart Accidents,  Motorcycle Accident Reconstruction,  OSHA,  Pedestrian Reconstructions,  Railroads,  Slip, Trip, and Fall,  Traffic Engineering,  Transportation,  Transportation Safety, 


Dr. Carl Berkowitz has held various managerial and administrative positions in the transportation industry, government, private and academic sectors. Dr. Berkowitz has extensive multi-modal experience in planning, design, engineering, safety, security, construction, maintenance, operations and management.

Dr. Berkowitz has written and edited numerous reports, studies, articles and columns for major publications, journals, newspapers and scholarly periodicals. He is a Professional Engineer in New York and New Jersey, and a member of the American Institute of Certified Planners; American Planning Association; American Society of Civil Engineers (Fellow, Transportation Education and Safety Committees); Association of Pedestrian and Bicycle Professionals; Institute of Transportation Engineers; American Society of Safety Engineers; National Association of Railroad Safety Consultants and Investigators; American Society of Transportation and Logistics; American Railway Engineering and Maintenance of Way Association (Committees 11 and 12, Facilities and Structures Subcommittee); American National Standards Institute, ASTM, International, Member Technical Committee F13 and Task Group D11.20.01 (Recycled Rubber); American Public Transit Association, Technical Committees (Public Safety, Rail Safety and Security, Rail Safety, Bus Safety and Rail Standards Policy and Planning); Human Factors and Ergonomics Society, Surface Transportation Technical Group; and Charter Institute of Logistics and Transport (Great Britain), Charter Member; American Physical Society; American Society of Mechanical Engineering, Bioengineering and Applied Mechanics Divisions; American Traffic Safety Service Association; Biomechanical Engineering Society; International Society of Biomechanics; Institute of Electrical and Electronics Engineers and the Vehicle Technology Society; National Fire Protection Association; and Rubber Pavement Association.

Grayhawk Safety & Health Consulting Company
Benton, Kentucky
5795 Mayfield Highway, 42025


Contact:  Randy Gray
www.grayhawksafety.com
270-703-8282 Or Toll Free
randy@grayhawksafety.com
5795 Mayfield Highway
Benton, Kentucky 42025

Contact:  Randy Gray
www.grayhawksafety.com
270-703-8282
randy@grayhawksafety.com
Randy Gray has worked for more than twenty-five years in the safety and health profession to bring his professional knowledge and educational experience to assess your workplace/job site for OSHA violations. Once hazardous and regulatory issues are identified, Grayhawk Safety & Health Consulting Company can help reduce or eliminate any identified items that could potentially cost your company thousands of dollars in penalties.
Information:  
Accident Analysis,  Construction Accidents,  Job Safety Analysis,  Manufacturing Accidents,  OSHA,  Safety,  Workplace Injury,  Workplace Safety,  Workplace Violence Prevention, 


Randy Gray has worked for more than twenty-five years in the safety and health profession to bring his professional knowledge and educational experience to assess your workplace/job site for OSHA violations. Once hazardous and regulatory issues are identified, Grayhawk Safety & Health Consulting Company can help reduce or eliminate any identified items that could potentially cost your company thousands of dollars in penalties.

Midwest Compliance Consultants, Inc. Safety Professionals
Bettendorf, Iowa
1820 Grant Street, PMB 5204, 52722


Contact:  Scott Jeffries
www.mccisafety.com
563-529-3558 Or Toll Free
scottj@mcci-safety.com
Safety Professionals
1820 Grant Street, PMB 5204
Bettendorf, Iowa 52722

Contact:  Scott Jeffries
www.mccisafety.com
563-529-3558
scottj@mcci-safety.com
International - Midwest Compliance Consultants, Inc., is a safety consulting firm which offers services in the areas of Construction Safety Management and OSHA compliance for General Industry. Some of our services include safety audits, customized safety training, written safety programs, job hazard assessments & record keeping analysis.
Information:  
Code Compliance,  Construction Safety,  Flammable Fabrics,  Forensic Safety,  Hazardous Materials,  Industrial Accidents,  Occupational Injury,  OSHA,  Safety,  Slip, Trip, and Fall,  Workplace Injury,  Workplace Safety, 


International - Midwest Compliance Consultants, Inc., is a safety consulting firm which offers services in the areas of Construction Safety Management and OSHA compliance for General Industry. Some of our services include safety audits, customized safety training, written safety programs, job hazard assessments & record keeping analysis.

On-going Safety and Health Advice
Spring Branch, Texas
, 78070


Contact:  Sandra Whitaker, CSHO, Managing Principal
On-going Safety and Health Advice Website
210-380-4554 Or Toll Free
s.whitaker@oshatx.com

Spring Branch, Texas 78070

Contact:  Sandra Whitaker, CSHO, Managing Principal
On-going Safety and Health Advice Website
210-380-4554
s.whitaker@oshatx.com
Sandra Whitaker was awarded the prestigious designation of Certified Safety and Health Official (CSHO) in 2005 from the U.S. Department of Labor – Occupational Safety & Health Administration. Additionally, Sandra holds both an Associate of Applied Science and Bachelor of Science degree in Occupational Safety and Health and has been designated as an Authorized Trainer from US-DOL-OSHA. Her proficiency in litigation support is in Case Analysis; Accident Investigation; Written Programs; US-DOL-OSHA 29 CFR 1910, - Audits, Regulation Compliance, Record-keeping, and Response to Citation and Inspections.

In 2013, after more than 40 years of personal experience in the field of Occupational Safety, Sandra left the corporate safety world to establish a private safety consulting firm. Under the business name On-going Safety & Health Advice, she provides expert witness services for plaintiff or defense attorneys.

For forty years Sandra provided private in-house professional safety expertise in various industries including Warehouse, Manufacturing, Logistics, Food & Beverage, and Service Industries. She has served as an Expert Witness since 2013, with 99% record on the prevailing side, her litigation history is approximately 70% Plaintiff and 30% Defendant.

Visit her website at www.oshatx.com for more detailed information and Sandra’s CV.
Information:  
Accident Injury,  Accident Investigations,  Litigation Support,  Manufacturing Accidents,  Occupational Injury,  OSHA,  Safety,  Safety Audit,  Safety Occupational,  Training Programs,  Workplace Injury, 


Sandra Whitaker was awarded the prestigious designation of Certified Safety and Health Official (CSHO) in 2005 from the U.S. Department of Labor – Occupational Safety & Health Administration. Additionally, Sandra holds both an Associate of Applied Science and Bachelor of Science degree in Occupational Safety and Health and has been designated as an Authorized Trainer from US-DOL-OSHA. Her proficiency in litigation support is in Case Analysis; Accident Investigation; Written Programs; US-DOL-OSHA 29 CFR 1910, - Audits, Regulation Compliance, Record-keeping, and Response to Citation and Inspections.

In 2013, after more than 40 years of personal experience in the field of Occupational Safety, Sandra left the corporate safety world to establish a private safety consulting firm. Under the business name On-going Safety & Health Advice, she provides expert witness services for plaintiff or defense attorneys.

For forty years Sandra provided private in-house professional safety expertise in various industries including Warehouse, Manufacturing, Logistics, Food & Beverage, and Service Industries. She has served as an Expert Witness since 2013, with 99% record on the prevailing side, her litigation history is approximately 70% Plaintiff and 30% Defendant.

Visit her website at www.oshatx.com for more detailed information and Sandra’s CV.

Safety Through Engineering, Inc.
New Carlisle, Ohio
9363 Detrick Jordan Pike, 45344


Contact:  Michael C. Wright, MSCE, PE, CSP, CPE, President
www.ste4u.com
937-964-1900 Or Toll Free
mikewright@ste4u.com
9363 Detrick Jordan Pike
New Carlisle, Ohio 45344

Contact:  Michael C. Wright, MSCE, PE, CSP, CPE, President
www.ste4u.com
937-964-1900
mikewright@ste4u.com
Information:  
Amusement Parks,  ANSI Standards,  Code Compliance,  Confined Space,  Construction Accidents,  Construction Defects,  Construction Safety,  Cranes,  Engineering,  Failure Analysis,  Fall Protection,  Job Safety Analysis,  Machine Safety,  OSHA,  Product Liability,  Safety,  Safety Audit,  Safety Engineering,  Slip, Trip, and Fall,  Structural Engineering,  Structural Failure,  Training Programs,  Wrongful Death, 



Traffic Safety Consultants
Kansas City, Missouri
P.O. Box 901436, 64190


Contact:  Catherine G. Witt
http://www.traffic-safety-consultants.com/
816-813-6232 Or Toll Free
movetraffic@aol.com
P.O. Box 901436
Kansas City, Missouri 64190

Contact:  Catherine G. Witt
http://www.traffic-safety-consultants.com/
816-813-6232
movetraffic@aol.com
I am a Temporary Traffic Control Specialist and have been in the industry for 30+ years. With my Associates we have a combined experience of over 100+ years in Traffic Control.

While working for the City of Overland Park, KS as a Traffic Control Technician in the Traffic Engineering Division, some of my duties included Plan Review of the plans submitted for work in the city limits, Right of Way Permit review for necessary temporary traffic control plans, Redesign of the City handbook specific to temporary traffic control including the municipal codes which pertained to them, Design of Temporary Traffic Control Patterns for in house designs, design of Special Event plans for all events including marathons, festivals, parades and any impediment of traffic in the city limits. One of the duties I was asked to perform was in house training of maintenance personnel, parks and recreation personnel, inspectors and any other personnel who were subject to live traffic while performing their duties.

I continued my teaching through American Traffic Safety Services Association better known by the acronym of ATSSA. I have been instructing through the ATSSA for 17 years and have trained over 20,000 people to date. Some of the courses I taught for ATSSA are; The Traffic Control Technician, Traffic Control Supervisor, Flagger Instructor train the trainer, Pavement Marking Technician, Effective use of Law Enforcement in Construction, Emergency Traffic Control for first responders, Night time Traffic Control, etc. Some of the state specific courses I teach are for the states of CA, FL, TX and VA along with many others. These state specific courses are taught based on the various States Standard drawings, State Standard Specifications for Road and Bridge, state specific Approved Products or Qualified Products list and various other documents which the state references for design, inspection and implementation.
Information:  
Code Compliance,  OSHA,  Personal Injury,  Traffic Engineering,  Transportation, 


I am a Temporary Traffic Control Specialist and have been in the industry for 30+ years. With my Associates we have a combined experience of over 100+ years in Traffic Control.

While working for the City of Overland Park, KS as a Traffic Control Technician in the Traffic Engineering Division, some of my duties included Plan Review of the plans submitted for work in the city limits, Right of Way Permit review for necessary temporary traffic control plans, Redesign of the City handbook specific to temporary traffic control including the municipal codes which pertained to them, Design of Temporary Traffic Control Patterns for in house designs, design of Special Event plans for all events including marathons, festivals, parades and any impediment of traffic in the city limits. One of the duties I was asked to perform was in house training of maintenance personnel, parks and recreation personnel, inspectors and any other personnel who were subject to live traffic while performing their duties.

I continued my teaching through American Traffic Safety Services Association better known by the acronym of ATSSA. I have been instructing through the ATSSA for 17 years and have trained over 20,000 people to date. Some of the courses I taught for ATSSA are; The Traffic Control Technician, Traffic Control Supervisor, Flagger Instructor train the trainer, Pavement Marking Technician, Effective use of Law Enforcement in Construction, Emergency Traffic Control for first responders, Night time Traffic Control, etc. Some of the state specific courses I teach are for the states of CA, FL, TX and VA along with many others. These state specific courses are taught based on the various States Standard drawings, State Standard Specifications for Road and Bridge, state specific Approved Products or Qualified Products list and various other documents which the state references for design, inspection and implementation.

Walt Kelly Enterprises, Inc.
Winona, Minnesota
1026 W. Howard Street, 55987


Contact:  Walt Kelly
waltkelly.com
507-454-5147 Or Toll Free
walt@waltkelly.com
1026 W. Howard Street
Winona, Minnesota 55987

Contact:  Walt Kelly
waltkelly.com
507-454-5147
walt@waltkelly.com
Expert in excavation damage to underground utilities including fiber optic telecommunications, electric, sewer and water, gas distribution and transmission pipelines caused by backhoes, horizontal directional drilling, and errors in locating. Experience as director of state office of pipeline safety enforcing damage prevention laws, consultant to Federal Office of Pipeline Safety to develop national damage prevention program. Has called in 12,000 excavation notices in 16 states, developed and oversaw safe excavation practices that resulted in 2/3 reduction in damages over 4,000 miles of fiber optic installation. Has written or assisted in passing one-call legislation in over 12 states. Presently active on national policy making organizations such as the Common Ground Alliance Best Practices Committee, writing for several trade publications on safety, and developing damage prevention tracks for national trade conferences. Over twenty years of expert witness work for plaintiff and defense.
Information:  
Construction,  Fire and Explosions,  OSHA,  Pipeline Pressure Vessels Failure,  Risk Management,  Underground Facility Damage,  Utilities, 


Expert in excavation damage to underground utilities including fiber optic telecommunications, electric, sewer and water, gas distribution and transmission pipelines caused by backhoes, horizontal directional drilling, and errors in locating. Experience as director of state office of pipeline safety enforcing damage prevention laws, consultant to Federal Office of Pipeline Safety to develop national damage prevention program. Has called in 12,000 excavation notices in 16 states, developed and oversaw safe excavation practices that resulted in 2/3 reduction in damages over 4,000 miles of fiber optic installation. Has written or assisted in passing one-call legislation in over 12 states. Presently active on national policy making organizations such as the Common Ground Alliance Best Practices Committee, writing for several trade publications on safety, and developing damage prevention tracks for national trade conferences. Over twenty years of expert witness work for plaintiff and defense.

Canney Brook Forensic Engineers
Boston, Massachusetts
, 02110


Contact:  R. Craig Williams P.E., CFEI, CFII
www.canneybrook.com
603-742-7200 Or Toll Free
solutions@canneybrook.com

Boston, Massachusetts 02110

Contact:  R. Craig Williams P.E., CFEI, CFII
www.canneybrook.com
603-742-7200
solutions@canneybrook.com

R. Craig Williams CV


Canney Brook Engineering and Consulting, LLC provides forensic engineering investigative solutions to insurance professionals and the legal profession. Accurate and efficient investigations allow for proper evaluation of losses, allow recovery, or protect from non-evidenced claims. Canney Brook provides services primary in New England and New York. Canney Brook accepts assignments throughout the US when Canney Brook's experts are able to provide unique and exceptional value to clients.

Our forensic engineering and fire and explosion analyses include investigation of reasonable alternative origin and cause hypotheses. Scene evidence is documented and hypotheses are tested to substantiate or disprove different hypotheses as a cause or contributory effect. This inductive-deductive procedure insures our reporting to is accurate, reasonable, scientifically based and defensible against challenges. Disproved hypotheses are explained and hypotheses supported by evidence are accepted, prepared, and advanced.

OUR COMMITMENT
Canney Brook provides clients a high level of measurable value. We at Canney Brook are committed to providing independent accurate information by which clients can make informed decisions. During investigations we may evaluate and suggest alternative solutions which mitigate damages suffered and provide enhanced outcomes. Our proactive approach and years of experience ensure that assignments will be completed on schedule and on-budget.

  OUR RECORD
Our consistent record of uncompromising ethics instills confidence and trust. Our staff responds quickly when retained, acts on behalf of the client, and remains available throughout the investigation and litigation.

Mr. Williams is a mechanical engineer with more than 27 years’ of practice in consulting, research, manufacturing, operations, product design, business development, and failure analysis prior to becoming a forensic engineer. Over his many years of licensed experience, he designed, specified, maintained, operated, and evaluated the equipment to which he now investigates for failure, incident, fire, and explosion analysis. His background as a professional consulting engineer, as a research engineer, as a construction manager, as a manufacturing, operations, and process manager, as a corporate officer, and as a director of an electric utility provided specialized training, experience, education and knowledge for his forensic engineering practice.

Mr. Williams conducts mechanical, electrical, and materials engineering failure analysis, product defect analysis, fire origin and cause investigations, environmental investigations, and workplace injury investigations. These services are provided to the insurance, industrial, institutional, corporate, and legal communities.

Mr. Williams holds a Bachelor’s of Science degree in Mechanical Engineering from the University of New Hampshire, a Master’s of Science degree in Architectural Engineering from The Pennsylvania State University, and has completed Doctoral Studies in International Business from Southern New Hampshire University. Principal Professional Engineer.
Information:  
Accident Investigations,  Fire and Explosions,  Fire Forensics,  Fire Origin and Cause,  Forensic Engineering,  HVAC Investigations,  Materials Science,  Mechanical Engineering,  OSHA,  Plumbing,  Product Failure,  Slip, Trip, and Fall, 


R. Craig Williams CV


Canney Brook Engineering and Consulting, LLC provides forensic engineering investigative solutions to insurance professionals and the legal profession. Accurate and efficient investigations allow for proper evaluation of losses, allow recovery, or protect from non-evidenced claims. Canney Brook provides services primary in New England and New York. Canney Brook accepts assignments throughout the US when Canney Brook's experts are able to provide unique and exceptional value to clients.

Our forensic engineering and fire and explosion analyses include investigation of reasonable alternative origin and cause hypotheses. Scene evidence is documented and hypotheses are tested to substantiate or disprove different hypotheses as a cause or contributory effect. This inductive-deductive procedure insures our reporting to is accurate, reasonable, scientifically based and defensible against challenges. Disproved hypotheses are explained and hypotheses supported by evidence are accepted, prepared, and advanced.

OUR COMMITMENT
Canney Brook provides clients a high level of measurable value. We at Canney Brook are committed to providing independent accurate information by which clients can make informed decisions. During investigations we may evaluate and suggest alternative solutions which mitigate damages suffered and provide enhanced outcomes. Our proactive approach and years of experience ensure that assignments will be completed on schedule and on-budget.

  OUR RECORD
Our consistent record of uncompromising ethics instills confidence and trust. Our staff responds quickly when retained, acts on behalf of the client, and remains available throughout the investigation and litigation.

Mr. Williams is a mechanical engineer with more than 27 years’ of practice in consulting, research, manufacturing, operations, product design, business development, and failure analysis prior to becoming a forensic engineer. Over his many years of licensed experience, he designed, specified, maintained, operated, and evaluated the equipment to which he now investigates for failure, incident, fire, and explosion analysis. His background as a professional consulting engineer, as a research engineer, as a construction manager, as a manufacturing, operations, and process manager, as a corporate officer, and as a director of an electric utility provided specialized training, experience, education and knowledge for his forensic engineering practice.

Mr. Williams conducts mechanical, electrical, and materials engineering failure analysis, product defect analysis, fire origin and cause investigations, environmental investigations, and workplace injury investigations. These services are provided to the insurance, industrial, institutional, corporate, and legal communities.

Mr. Williams holds a Bachelor’s of Science degree in Mechanical Engineering from the University of New Hampshire, a Master’s of Science degree in Architectural Engineering from The Pennsylvania State University, and has completed Doctoral Studies in International Business from Southern New Hampshire University. Principal Professional Engineer.

J.M. Miller Engineering, Inc.
Ann Arbor, Michigan
2392 Fuller Court, 48105


Contact:  J.M. Miller
www.millerengineering.com
734-662-6822 Or Toll Free
miller@millerengineering.com
2392 Fuller Court
Ann Arbor, Michigan 48105

Contact:  J.M. Miller
www.millerengineering.com
734-662-6822
miller@millerengineering.com
Dr. Miller is an Emeritus Professor at the University of Michigan College of Engineering and a registered professional engineer and consultant with over 30 years of experience as an engineering expert witness. He specializes in warnings, labeling and instruction manuals, consumer product design, machine guarding, process safety, fire science, vehicle visibility, tractor egress/ingress, pedestrian and worker slip and fall prevention, COF testing, recreational vehicle safety (boats, ATVs and personal watercraft), compliance with occupational safety and consumer safety standards (OSHA, MSDS, ANSI, ASTM, UL, CPSC).
Miller Engineering has a staff of engineers and experts in the Mechanical, Chemical, Agriculture, Industrial, and Human Factors Engineering.
Dr. Miller has recently authored a chapter titled Hazard Communication Compliance in the Safety Engineering Handbook for ASSE. Dr. Miller has authored five books on the topic of Warnings and Safety Instructions and hundreds of journal articles. He is also currently a committee member of the ASTM Technical Committee F15 on Consumer Products.
Dr. Miller’s experience includes the following: Bachelor of Mechanical Engineering (1963), M.B.A. (1965), and Ph.D. in Industrial Engineering (1971), Ohio State University. Owens-Corning Fiberglass (1964-1967): Corporate Methods Engineer. The University of Michigan (1970-present): Industrial and Operations Engineering (IOE) Professor, teaching courses in human factors/ergonomics, safety, engineering law, and labor relations. U.S. Department of Labor (1975-1977): Special Assistant for Safety, Assistant Secretary of Labor.
Information:  
Accident Investigations,  Accident Reconstruction,  Agricultural Engineering,  Construction Safety,  Consumer Products,  Ergonomics,  Fire and Explosions,  Forklifts,  Human Factors,  Industrial Accidents,  Labels and Warnings,  Mechanical Engineering,  OSHA,  Personal Injury,  Product Warnings,  Slip, Trip, and Fall,  Toxic Exposures,  Toy Safety Design,  Transportation,  Work Zone and Flagger Safety, 


Dr. Miller is an Emeritus Professor at the University of Michigan College of Engineering and a registered professional engineer and consultant with over 30 years of experience as an engineering expert witness. He specializes in warnings, labeling and instruction manuals, consumer product design, machine guarding, process safety, fire science, vehicle visibility, tractor egress/ingress, pedestrian and worker slip and fall prevention, COF testing, recreational vehicle safety (boats, ATVs and personal watercraft), compliance with occupational safety and consumer safety standards (OSHA, MSDS, ANSI, ASTM, UL, CPSC).
Miller Engineering has a staff of engineers and experts in the Mechanical, Chemical, Agriculture, Industrial, and Human Factors Engineering.
Dr. Miller has recently authored a chapter titled Hazard Communication Compliance in the Safety Engineering Handbook for ASSE. Dr. Miller has authored five books on the topic of Warnings and Safety Instructions and hundreds of journal articles. He is also currently a committee member of the ASTM Technical Committee F15 on Consumer Products.
Dr. Miller’s experience includes the following: Bachelor of Mechanical Engineering (1963), M.B.A. (1965), and Ph.D. in Industrial Engineering (1971), Ohio State University. Owens-Corning Fiberglass (1964-1967): Corporate Methods Engineer. The University of Michigan (1970-present): Industrial and Operations Engineering (IOE) Professor, teaching courses in human factors/ergonomics, safety, engineering law, and labor relations. U.S. Department of Labor (1975-1977): Special Assistant for Safety, Assistant Secretary of Labor.

Raising the Standard Consulting Inc.
Honolulu, Hawaii
500 Ala Moana Blvd, Ste. 7400, 96813


Contact:  Stanford R Brown, B.Sc., CSP, CSHP, CRSP, CHSC
rtsconsulting.com
808-426-3464 Or Toll Free
sbrown@rtsconsulting.com
500 Ala Moana Blvd, Ste. 7400
Honolulu, Hawaii 96813

Contact:  Stanford R Brown, B.Sc., CSP, CSHP, CRSP, CHSC
rtsconsulting.com
808-426-3464
sbrown@rtsconsulting.com
Stanford R. Brown, B.Sc., CSP, CSHP, CRSP, CHSC,has over 30 years of experience managing safety and health for various projects.
He has been involved with multiple construction safety/OSHA cases as an expert witness.

A sampling of the expert witness cases he has been involved with include:
• Workplace injury at refinery construction project.
• Worker fatally electrocuted during a paving incident.
• Construction training and safety standards for power tool injury.

Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii.

Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavation/Trenching, Crush, Traffic Control, Multi-Employer, Cranes, Confined Space, Demolition, Directional Drilling, Electric, Equipment, Machine Guarding, Excavation, Paving, Power Tools, Rigging, Shoring.
Information:  
Accident Investigations,  Construction,  Construction Accidents,  Construction Defects,  Construction Safety,  Cranes,  Fall Protection,  Machine Safety,  Mining,  OSHA,  Safety,  Ship slip trip and fall ,  Workplace Injury,  Workplace Safety, 


Stanford R. Brown, B.Sc., CSP, CSHP, CRSP, CHSC,has over 30 years of experience managing safety and health for various projects.
He has been involved with multiple construction safety/OSHA cases as an expert witness.

A sampling of the expert witness cases he has been involved with include:
• Workplace injury at refinery construction project.
• Worker fatally electrocuted during a paving incident.
• Construction training and safety standards for power tool injury.

Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii.

Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavation/Trenching, Crush, Traffic Control, Multi-Employer, Cranes, Confined Space, Demolition, Directional Drilling, Electric, Equipment, Machine Guarding, Excavation, Paving, Power Tools, Rigging, Shoring.

Crane Experts International Inc.
Fairhope, Alabama
PO Box 461, 36533


Contact:  James Pritchett
www.craneexpert.com
251-533-0498 Or Toll Free
pritchettj@aol.com
PO Box 461
Fairhope, Alabama 36533

Contact:  James Pritchett
www.craneexpert.com
251-533-0498
pritchettj@aol.com
Crane Experts International, Inc. is proud to include the following distinctions:

James Pritchett

- James Pritchett has been in business since 1987 under the name of Crane Inspection Services, Inc., my main business. Crane Inspection Services, Inc. is a recognized private agency, accredited by the U.S. Department of Labor under 29 CFR Part 1919, to inspect, test, and issue documents/papers of certification where required on shore-based material handling devices, without limitation, and floating cranes and derricks under the OSHA Maritime Safety Regulations 29 CFR Parts 1915 (shipyards), 1917 (marine terminals), and 1918 (longshoring). Crane Inspection Services, Inc. is capable of load testing, inspecting, and performing training/schools for all types of cranes that are general industry and construction related.

- James Pritchett is past accredited by OSHA to teach courses in Construction Safety and Health Regulations

- James Pritchett is a past instructor for the U.S. Department of Labor and provide training in the 1910 Standards as they apply to cranes.

- James Pritchett is one of a small number of delegates from the United States of Americato the Technical Advisory Group (TAG) within ISO, Technical Committee for Cranes TC96. This committeeformulation of crane safety guidelines.

- James Pritchett is Past President of the Crane Certification Association of America(CCAA). This is a national association that is made up of the maritime agencies nationwide.

Information:  
Accident Injury,  Aerial Lifts,  ANSI Standards,  Construction Safety,  Cranes,  Equipment and Machinery,  Expert Witness at Trial,  Expert Witness Testimonies,  Forklifts,  Industrial Accidents,  Job Safety Analysis,  Labels and Warnings,  Ladders and Manlifts,  Litigation Consulting,  Litigation Support,  Material Handling,  OSHA,  Safety,  Safety Audit,  Safety Engineering,  Ships,  Structural Failure,  Technical,  Training Programs,  Trial Consultants,  Trial Preparation, 


Crane Experts International, Inc. is proud to include the following distinctions:

James Pritchett

- James Pritchett has been in business since 1987 under the name of Crane Inspection Services, Inc., my main business. Crane Inspection Services, Inc. is a recognized private agency, accredited by the U.S. Department of Labor under 29 CFR Part 1919, to inspect, test, and issue documents/papers of certification where required on shore-based material handling devices, without limitation, and floating cranes and derricks under the OSHA Maritime Safety Regulations 29 CFR Parts 1915 (shipyards), 1917 (marine terminals), and 1918 (longshoring). Crane Inspection Services, Inc. is capable of load testing, inspecting, and performing training/schools for all types of cranes that are general industry and construction related.

- James Pritchett is past accredited by OSHA to teach courses in Construction Safety and Health Regulations

- James Pritchett is a past instructor for the U.S. Department of Labor and provide training in the 1910 Standards as they apply to cranes.

- James Pritchett is one of a small number of delegates from the United States of Americato the Technical Advisory Group (TAG) within ISO, Technical Committee for Cranes TC96. This committeeformulation of crane safety guidelines.

- James Pritchett is Past President of the Crane Certification Association of America(CCAA). This is a national association that is made up of the maritime agencies nationwide.


LSW & Associates Safety Consulting Services, LLC
Pueblo, Colorado
PO Box 7359, 81007


Contact:  Steven R. Sawyer, ARM, MS, CSP
sawyersafetysolutions.com
719-696-2682 Or Toll Free
stevenrsawyerco@gmail.com
PO Box 7359
Pueblo, Colorado 81007

Contact:  Steven R. Sawyer, ARM, MS, CSP
sawyersafetysolutions.com
719-696-2682
stevenrsawyerco@gmail.com
Board Certified Safety Professional (CSP) with a Master’s Degree in Safety Management and an Associate of Risk Management (ARM).
Twenty years- experience as a safety consultant working with clients in General Industry and Agribusinesses to prevent incidents and protect workers.
Speaker at state safety conferences and trade associations.
OSHA Authorized General Industry Trainer for 10 and 30 Hour courses.
Ives certified trainer for forklifts, telehandlers, skid-steers, front end loaders, back hoes, boom lifts and scissor lifts.
Conducted fatality and catastrophic incident investigations for clients to determine cause of incidents.
Audited client’s safety programs to determine compliance with government regulations and determine areas for improvement.
Assisted clients with OSHA inspections and citation abatement.
Assisted clients with safety program development and conducted safety training.
Trained workers where English is a second language.
Professional member of the American Society of Safety Professionals.
Information:  
Industrial Accidents,  OSHA,  Safety, 


Board Certified Safety Professional (CSP) with a Master’s Degree in Safety Management and an Associate of Risk Management (ARM).
Twenty years- experience as a safety consultant working with clients in General Industry and Agribusinesses to prevent incidents and protect workers.
Speaker at state safety conferences and trade associations.
OSHA Authorized General Industry Trainer for 10 and 30 Hour courses.
Ives certified trainer for forklifts, telehandlers, skid-steers, front end loaders, back hoes, boom lifts and scissor lifts.
Conducted fatality and catastrophic incident investigations for clients to determine cause of incidents.
Audited client’s safety programs to determine compliance with government regulations and determine areas for improvement.
Assisted clients with OSHA inspections and citation abatement.
Assisted clients with safety program development and conducted safety training.
Trained workers where English is a second language.
Professional member of the American Society of Safety Professionals.

The Kilpatrick Group, PA.
Jamestown, North Carolina
3397 Cherrybrook Drive, 27282


Contact:  Gary E. Kilpatrick
www.thekilpatrickgrouppa.com
336-841-6354 Or Toll Free
kilpatrickg1@northstate.net
3397 Cherrybrook Drive
Jamestown, North Carolina 27282

Contact:  Gary E. Kilpatrick
www.thekilpatrickgrouppa.com
336-841-6354
kilpatrickg1@northstate.net

Gary Kilpatrick's CV


Gary E. Kilpatrick and Associates, P.A. is a forensics engineering firm dedicated to the application of the art, science and methodology of engineering and the scientific method to answer questions of fact in the jurisprudence system pertaining to personal injury and wrongful death concerning accidents and product defects and failures.
Information:  
Accident Investigations,  Accident Reconstruction,  Aerial Lifts,  Amusement Parks,  Analysis,  ANSI Standards,  Automobile Accidents,  Automotive,  Commercial Vehicle Accident Reconstruction,  Computer Animation,  Conveyors,  Cranes,  Crash Data Retrieval,  Elevators and Escalators,  Farms and Farm Safety,  Food Manufacturing,  Forensic Engineering,  Forklifts,  Forklifts and Cranes,  Forklifts and Cranes,  Human Factors,  Industrial Accidents,  Industrial Accidents,  Industrial Equipment,  Job Safety Analysis,  Labels and Warnings,  Ladders and Manlifts,  Machine Safety,  Manufacturing Accidents,  Material Handling,  Motorcycle Accident Reconstruction,  OSHA,  Pipeline Pressure Vessels Failure,  Product Warnings,  Safety,  Safety Audit,  Safety Engineering,  Safety Occupational,  Warehouse and Storage,  Workers' Compensation, 


Gary Kilpatrick's CV


Gary E. Kilpatrick and Associates, P.A. is a forensics engineering firm dedicated to the application of the art, science and methodology of engineering and the scientific method to answer questions of fact in the jurisprudence system pertaining to personal injury and wrongful death concerning accidents and product defects and failures.

Smart Fleet Management LLC
Bixby, Oklahoma
13507 S. 20th Street, 74008


Contact:  Mr. Leslie A Smart
www.smartfleetmgmt.com/
918-671-0678 Or Toll Free
smart5010@atlasok.com
13507 S. 20th Street
Bixby, Oklahoma 74008

Contact:  Mr. Leslie A Smart
www.smartfleetmgmt.com/
918-671-0678
smart5010@atlasok.com

Leslie A. Smart's CV


Leslie Smart has 50 (fifty) years of experience in trucks, truck equipment, related equipment, distribution by truck and tractor trailer (conventional and Hazmat), specifications, procurement, vehicle safety, DOT regulations-compliance, operations, risk management, tires, truck maintenance (internal & by contract both with Penske & Ryder) and driver safety, training, behavior & monitoring. His experience also includes leasing of all types including full service leases and managing a fleet through a fleet management company. Responsibilities included the management of fleets of up to 5,500 vehicles in number.

As an expert witness, Mr. Smart has worked equally with defendants and plaintiffs on over 35 cases specializing in personal injury related to trucking, truck litigation, driver safety, fleet management, corporate fleet management, and operations.

• Professional Associations: Member of N.A.F.A. & N.T.E.A.
• Extensive experience using Penske, Ryder and other providers under contract.
• Published author for Business Fleet; Work Truck & Heavy Duty Trucking. A dozen articles or more may be found on the Business Fleet website: www.businessfleet.com search for his name.
Information:  
Accident Investigations,  Hazardous Materials,  Information Technologies,  Oil and Gas,  OSHA,  Risk Management,  Safety,  Tires,  Transportation,  Trucking, 


Leslie A. Smart's CV


Leslie Smart has 50 (fifty) years of experience in trucks, truck equipment, related equipment, distribution by truck and tractor trailer (conventional and Hazmat), specifications, procurement, vehicle safety, DOT regulations-compliance, operations, risk management, tires, truck maintenance (internal & by contract both with Penske & Ryder) and driver safety, training, behavior & monitoring. His experience also includes leasing of all types including full service leases and managing a fleet through a fleet management company. Responsibilities included the management of fleets of up to 5,500 vehicles in number.

As an expert witness, Mr. Smart has worked equally with defendants and plaintiffs on over 35 cases specializing in personal injury related to trucking, truck litigation, driver safety, fleet management, corporate fleet management, and operations.

• Professional Associations: Member of N.A.F.A. & N.T.E.A.
• Extensive experience using Penske, Ryder and other providers under contract.
• Published author for Business Fleet; Work Truck & Heavy Duty Trucking. A dozen articles or more may be found on the Business Fleet website: www.businessfleet.com search for his name.